It is the duty and desire of electricians to have all components functioning in the most optimal level. Malfunction is often caused by damages, poor installation work, corrosion or even contamination. The most common sign of a problem in the system is excessive heat resulting from poor conductivity. If left unchecked, the results can range from unnecessary and costly power disruption to very catastrophic events such as electrocution and fires. Initially, more costly and time consuming physical inspection was the only dependable way to keep the system safe but engineers are now migrating to electrical infrared inspection method which has proven not only cheaper but more effective.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
Excessive heat is normally an indication of the underlying problem that must be handled before a disaster. Other than mechanical damages to power lines and other electrical devices, there are several causes of overheating but the common ones include faulty assembly, loose connections, wear and tear, ground faults, contamination and corrosion. Most of these results from exposure to physical elements and thus calls for periodic inspection.
The devices that requires infrared surveys are the bus ducts, the distribution center, the distribution panels, receptacle panel, the transformers, lighting system, switchgears, disconnects and other components that make up the system. If well done, the uninterruptable power supply can be achieved as there is no need to shut down the system. The process of inspection takes place under the normal load without any disturbance to normal supply.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
With the endorsement and approval from the InterNational Electrical Testing Association and the National Fire Protection Association and other related regulatory authorities, it is a mistake to continue depending on the manual method of testing.
Among several benefits you stand to benefit from, there is the precise pinpointing of hotspots, reduced down time, elimination of unscheduled outages, reduced cost of energy due to efficiency and predictive or proactive approach to electrical maintenance program. The general reduction of resource deployed (human resources and finances) also translates to lower cost of energy.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
The general recommendation is that all parts of electrical system that are exposed to vibrations and or any other movements are inspected at least every six months while the rest are inspected on annual basis. For the system exposed to earthquakes, frozen winter conditions, very strong winds and tsunamis, there is a need for more frequent testing.
Excessive heat is normally an indication of the underlying problem that must be handled before a disaster. Other than mechanical damages to power lines and other electrical devices, there are several causes of overheating but the common ones include faulty assembly, loose connections, wear and tear, ground faults, contamination and corrosion. Most of these results from exposure to physical elements and thus calls for periodic inspection.
The devices that requires infrared surveys are the bus ducts, the distribution center, the distribution panels, receptacle panel, the transformers, lighting system, switchgears, disconnects and other components that make up the system. If well done, the uninterruptable power supply can be achieved as there is no need to shut down the system. The process of inspection takes place under the normal load without any disturbance to normal supply.
Using the state of the art equipment deployed for scanning, thousands of components get inspected in a matter of hours with very accurate results. With very high rate of efficiency and effectiveness, most of engineers are now using this form of inspection. It cut down on staff needed for the job and increases profitability by a big margin. In fact, it has one to four returns on investment and as such, companies that hope to survive into the future have to adopt this technology.
With the endorsement and approval from the InterNational Electrical Testing Association and the National Fire Protection Association and other related regulatory authorities, it is a mistake to continue depending on the manual method of testing.
Among several benefits you stand to benefit from, there is the precise pinpointing of hotspots, reduced down time, elimination of unscheduled outages, reduced cost of energy due to efficiency and predictive or proactive approach to electrical maintenance program. The general reduction of resource deployed (human resources and finances) also translates to lower cost of energy.
It is important to trust the surveying services to a company that has expert engineers, the necessary machinery for the job and well proven track record in order to enjoy the full benefits of this new technology.
About the Author:
You can visit www.infraredscanningservice.com for more helpful information about Using Electrical Infrared Inspection Is A Sure Way To Save Time And Money.
No comments:
Post a Comment